TECHNICAL PAPERS: 2000 - 2008
The following technical papers were written by Quartus Engineering personnel. Use your web browser's "Search" or "Find" command to locate key words or titles. Please contact us if you would like a printed copy of the technical paper or if we can provide any additional information.
2008
Arritt, B.J., Robertson, L.M., Williams, A.D., Henderson, B.K., Buckley, S.J., Ganley, J.M., Welsh, J.S., Ouyang, L., Beard, S., Clayton E. H., Todd, M.D., Doyle D., Zagrai, A., “Structural Health Monitoring; an Enabler for Responsive Satellites,” Proceeding of the 49th Structures, Structural Dynamics, and Materials Conference (SDM), Schaumburg, Illinois, April 7-10, 2008.
Download PDF
Arritt, B.J., Todd, M.D., Ouyang, L., Doyle, D., Clayton, E.H., Zagrai, A.N., Kumar, A., Beard, S.J., Ganley, J.M., “Structural Health Monitoring,” Proceedings of the 15th SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, California, March 9-13, 2008.
Download PDF
Clayton, E.H., Kennel, M.B., Fasel T.R., Todd, M.D., Stabb, M.C., Arritt, B.J., “Active Ultrasonic Joint Integrity Adjudication for Real-time Structural Health Monitoring,” Proceedings of the 15th SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, California, March 9-13, 2008.
Download PDF
Fasel, T.R., Kennel, M.B., Todd, M.D., Clayton, E.H., Stabb, M.C., Park, G., “Bolted Joint Damage Assessment Using Chaotic Probes,” Proceedings of the 26th International Modal Analysis Conference (IMAC XXVI), Orlando, Florida, February 4-7, 2008.
Download PDF
2007
B. J. Arritt, S. J. Buckley, J. M. Ganley, A. Kumar, E. H. Clayton, R. Hannum, M. D. Todd, M. B. Kennel, J. Welsh, S. Beard, M. C. Stabb, Q. Xinlin, P. Wegner, “Responsive Satellites and the Need for Structural Health Monitoring,” 6th International Workshop on Structural Health Monitoring, Stanford, CA, September 11 - 13, 2007
Download PDF
2006
E. H. Clayton, Y. Qian, O. Orjih, S. J. Dyke, A. Mita, C. Lu, “Off-the-Shelf Modal Analysis: Structural Health Monitoring with Motes,” In proceedings of the 24th International Modal Analysis Conference (IMAC-XXIV), St. Louis, MO, January 29 – February 2, 2006.
Download PDF
Clayton, E. H., Dyke, S. J., Lu, C. (2006). “In-situ Damage Detection and Localization Implementing
Distributed Smart Sensor Technology”, Fourth World Conference on Structural
Control and Monitoring, San Diego, CA.
Download PDF
Song, W., Giraldo, D. F., Clayton, E. H., Dyke, S. J., Ciacedo, J. M. (2006). “Application
of ARMAV for Modal Identification of the Emerson Bridge”, Proceedings of the Third International Conference on Bridge Maintenance, Safety and Management (IABMAS06), Porto, Portugal.
Download PDF
Boesch, D.A., Reid, J.D., and Bielenberg R.W., "Detailed Tire Modeling for Crash Applications," ICrash 2006, Athens Greece, 4th-7th July 2006.
Download PDF
2005
Boesch, D.A., and Reid, J.D., "Further Improvements to the Truck Model for Roadside Safety Simulation - Suspension and Steering," 5th European LS-DYNA Users Conference, May 25-26, 2005.
Download PDF
Clayton, E. H., Koh, B. H., Xing, G., Fok, C. L., Dyke, S. J., Lu, C. (2005). “Damage
Detection and Correlation-based Localization Using Wireless Mote Sensors”, Proceedings
of the 13th Mediterranean Conference on Control and Automation (MED05), Limassol, Cyprus.
Download PDF
2004
Kammer, D.C., Cessna, J., and Kostuch, A., "An Effective Mass Measure for Selecting Free-Free Target Modes," 22nd International Modal Analysis Conference, Detroit, Michigan, 2004.
Download PDF
Stern, T.G., and DeLapp, S., "Techniques for Magnetic Cleanliness on Spacecraft Solar Arrays," 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, August 16-19, 2004.
Download PDF
2003
White, M., Whatley, W., and Kostuch, A., "Advanced Biofidelic Lower Extremity (ABLE) Prosthesis Development," Pediatric and Foot and Ankle: New Horizons in Clinical Treatment and Innovative Technology Symposium, National Institutes of Health Bethesda, MD, November 15, 2003.
2000
Flanigan, C.C., and Stabb, M.C.,"An Assessment of MSC.NASTRAN Residual Vector Methodology for Dynamic Loads Analysis," 18th International Modal Analysis Conference, San Antonio, Texas, February 7-10, 2000.
Download PDF
Flanigan, C.C., "Modal Testing Basics: FEM for the Test Engineer," 18th International Modal Analysis Conference, San Antonio, Texas, February 7-10, 2000.
Download PowerPoint (97)